Sliding Gate Automation

Sliding Gate Automation

Sliding Gate Automation kits are designed to make an existing sliding gate open and close automatically. A flat gear or rack attaches to the side of the gate and the pinion gear on the motor winds the gate open and closed.

Planned and fabricated with superior square or rectangular hollow sections, along with MS sheets and flats collected by high quality welding

Gates are beautifully designed and the pre-tensioning of the gate leaf construction diminishes the risk of bending

Varied choice of models for gates weighing from 300 kg to 18000 kg

Manual operation in case of power failure

Highly condensed dimensions & very silent operation. Built-in anti jerk device stops damage to the automatic system

Startup at extreme power permits the motor to overcome any initial friction caused by ice, dust, etc. Motor protected by an internal thermal switch

Problem detection causes the gate movement to stop if an hindrance is detected

The advance electronic control unit licenses operation time adjustment, partial opening, reflex closing, step by step control, stop safety, reverse safety etc.

Choosing an electric sliding gate kit system can be split into 3 Stages.

[1] Hardware - Hardware kit to make your gate a sliding gate, e.g. rollers, floor track etc.
[2] Automation - Choose a kit below to make an existing sliding gate move automatically.
[3] Safety - Add safety edges to make the gate safe.